Vape Liquid 101: What Is The Right Way To Change E-Liquid

If the e-cigarette becomes sweeter, less effective, or you want to switch to a different type of liquid after using it for a while, what should you do? Here are some practical methods: 

1.Wash with warm water. Pour just the right amount of warm water into an e-cigarette vaporizer, shake it gently for a minute or two, then pour the water out and dry it with a hair dryer. It's easy, but it still leaves the smell of vape.

2.Vinegar wash. Put the vaporizer in water mixed with vinegar and boil it for about 10 minutes. Rinse it with water and dry it again. Vinegar is a great way to clean an e-cigarette vaporizer, and it works just fine.

3.Soak in cola. Soak the e-cigarette vaporizer in a glass of Coke for 24 hours.  Remove and rinse with warm water, cold water or boiling water, then dry. This method is more cumbersome, but the effect is not very ideal.

4.Vodka rinse. Dry the vaporizer, pour in enough vodka, seal the vaporizer with your finger and shake gently for one to two minutes before pouring out. Then rinse with hot water and leave to dry. It's a luxurious method, but it's also a relatively effective way to remove the dirt and smell from the inside of your e-cigarette vaporizer.

5.Tilt placement. Place a paper towel flat on a table top and tilt the vaporizer over it for 24 hours. The liquid in the e-cigarette vaporizer will slowly drain out. Then, rinse with warm water and dry with a hair dryer. This is also considered a more effective method.

Of course, if you think they are all complicated, you can directly replace the vaporizer, which saves both time and effort.